Evaluation and improvement of coastal GNSS reflectometry sea level variations from existing GNSS stations in Taiwan

Global sea level rise due to an increasingly warmer climate has begun to induce hazards, adversely affecting the lives and properties of people residing in low-lying coastal regions and islands. Therefore, it is important to monitor and understand variations in coastal sea level covering offshore regions. Signal-to-noise ratio (SNR) data of Global Navigation Satellite System (GNSS) have been successfully used to robustly derive sea level heights (SLHs). In Taiwan, there are a number of continuously operating GNSS stations, not originally installed for sea level monitoring. They were established in harbors or near coastal regions for monitoring land motion. This study utilizes existing SNR data from three GNSS stations (Kaohsiung, Suao, and TaiCOAST) in Taiwan to compute SLHs with two methods, namely, Lomb–Scargle Periodogram (LSP)-only, and LSP aided with tidal harmonic analysis developed in this study. The results of both methods are compared with co-located or nearby tide gauge records. Due to the poor quality of SNR data, the worst accuracy of SLHs derived from traditional LSP-only method exceeds 1?m at the TaiCOAST station. With our procedure, the standard deviations (STDs) of difference between GNSS-derived SLHs and tide gauge records in Kaohsiung and Suao stations decreased to 10?cm and the results show excellent agreement with tide gauge derived relative sea level records, with STD of differences of 7?cm and correlation coefficient of 0.96. In addition, the absolute GNSS-R sea level trend in Kaohsiung during 2006–2011 agrees well with that derived from satellite altimetry. We conclude that the coastal GNSS stations in Taiwan have the potential of monitoring absolute coastal sea level change accurately when our proposed methodology is used.     

Shock acceleration of energetic particles in corotating interaction regions

A simple shock model for the acceleration of energetic particles in corotating interaction regions (CIR) in the solar wind is presented. Particles are accelerated at the forward and reverse shocks which bound the CIR by being compressed between the shock fronts and magnetic irregularities upstream from the shocks, or by being compressed between upstream irregularities and those downstream from the shocks. Particles also suffer adiabatic deceleration in the expanding solar wind, an effect not included in previous shock models for acceleration in CIR's. The model is able to account for the observed exponential spectra at earth, the observed behavior of the spectra with radial distance, the observed radial gradients in the intensity, and the observed differences in the intensity and spectra at the forward and reverse shocks.     

On the electrodynamics of counter stream in pulsar’s inner annular cap region

The electric properties of pulsar’s inner annular gap are explored in this paper. Under two main assumptions, (1) the pulsar is alive, (2) the total charge of pulsar should not vary with time, the condition for the acceleration of negative particle in the annular region is derived. The acceleration condition is j₋ ? 0.5j₊, i.e., the current carried by negative particles is greater than or equal to 0.5 times of the current carried by positive particles. This condition holds even when the backward flow of positive particles exists in the annular region. It is noted that the outflow of negative particles offers good opportunities to understand the current closure problem of pulsar as well as wide radiation beam of pulsar observed at high energy band.     

Information extraction from thematic mapper data

The Landsat-4 spacecraft, launched on July 9, 1982, is equipped with a new electro-optical sensor expected to advance the remote sensing capabilities of Earth resources satellites. An experimental instrument, the thematic mapper (TM), provides data in seven discrete energy bands with greatly improved spectral, spatial and radiometric resolution, relative to previous Landsat satellite systems. Scientists at NASA, National Space Technology Laboratories (NSTL), Earth Resources Laboratory (ERL) conducted an evaluation of Landsat-4 TM data, soon after its launch, to examine the potential of this new electro-optical sensor for providing improved information for renewable resources and land cover studies. Investigations of TM data included forested wetland, urban and agricultural land covers using a scene of data collected over Arkansas and Tennessee on August 22, 1982. Standard digital information extraction techniques were employed, and the classification accuracies achieved with a single date TM data set exceeded a 90% correct confidence level. While only spectral analysis techniques were utilized for this initial evaluation, the results clearly indicate the improved performance provided by the experimental TM sensor over previous Earth observing capabilities.     

Direct Energy Transfer for High Efficiency Photovoltaic Energy Systems Part I: Concepts and Hypothesis

This two-part paper presents a comprehensive comparative study on parallel power processing (PPP) and standard schemes in dc/dc converters for photovoltaic (PV) energy systems. It is demonstrated how PPP can improve direct energy transfer (DET), which results in PV systems operating at higher voltage and efficiency. Discussions of the concepts, hypotheses and computer simulations are presented in Part I. Part II provides the experimental results, which confirm the validity of the analysis and simulations.     

ISO 9000 认证所带来的利益及质量管理之发展(英文)

本文总结了９项有关ＩＳＯ９０００认证的研究，主要论述了这套国际标准为实施者所带来之利益。这９项研究分别在英国、新西兰、澳大利亚、中国香港特区、美国、巴西、加拿大、法国、德国、日本、韩国、瑞典和荷兰等地进行。研究发现，ＩＳＯ９０００的主要优点有：令运作方式系统化、减少损耗、增加效率和减少顾客投诉。取得ＩＳＯ９０００认证的公司，大多采取较严格的方法去控制分供方。不少取得证书的公司还表示，他们会进一步采用其他的质量管理方法，例如全面优质管理，ＩＳＯ９０００，ＩＳＯ１４０００和优质奖的规格。     

An Introduction to Theory and Models of CMEs, Shocks, and Solar Energetic Particles

We present a brief introduction to the essential physics of coronal mass ejections as well as a review of theory and models of CME initiation, solar energetic particle (SEP) acceleration, and shock propagation. A brief review of the history of CME models demonstrates steady progress toward an understanding of CME initiation, but it is clear that the question of what initiates CMEs has still not been solved. For illustration, we focus on the flux cancellation model and the breakout model. We contrast the similarities and differences between these models, and we examine how their essential features compare with observations. We review the generation of shocks by CMEs. We also outline the theoretical ideas behind the origin of a gradual SEP event at the evolving CME-driven coronal/interplanetary shock and the origin of “impulsive” SEP events at flare sites of magnetic reconnection below CMEs. We argue that future developments in models require focused study of “campaign events” to best utilize the wealth of available CME and SEP observations.     

Space experiments aboard the Lomonosov MSU satellite

At present, the Institute of Nuclear Physics of Moscow State University, in cooperation with other organizations, is preparing space experiments onboard the Lomonosov satellite. The main goal of this mission is to study extreme astrophysical phenomena such as cosmic gamma-ray bursts and ultra-high-energy cosmic rays. These phenomena are associated with the processes occurring in the early universe in very distant astrophysical objects, therefore, they can provide information on the first stages of the evolution of the universe. This paper considers the main characteristics of the scientific equipment aboard the Lomonosov satellite.     

PI controller relay auto-tuning using delay and phase margin in PMSM drives

This paper presents an auto-tuning method for a proportion plus integral（PI） controller for permanent magnet synchronous motor（PMSM） drives, which is supposed to be embedded in electro-mechanical actuator（EMA） control module in aircraft. The method, based on a relay feedback with variable delay time, explores different critical points of the system frequency response.The Nyquist points of the plant can then be derived from the delay time and filter time constant.The coefficients of the PI controller can then be obtained by calculation while shifting the Nyquist point to a specific position to obtain the required phase margin. The major advantage of the autotuning method is that it can provide a series of tuning results for different system bandwidths and damping ratios, corresponding to the specification for delay time and phase margin. Simulation and experimental results for the PMSM controller verify the performance of both the current loop and the speed loop auto-tuning.